We are proud that we can now bring you the best minbike forks money can buy, produced by Marzocchi!

These race proved forks are a massive improvement over any stock fork and are the best on the market, the complete kit includes Shiver 35mm USD forks with triple clamps, 10/12/14inch hub/wheel and hydraulic disk brake system.

These forks have been developed especially for minibike racing using Marzocchi's years of experience in the Mountain Bike and Motocross markets.

The Shiver 35mm USD forks are the best upgrade available. This option is for 'Legs Only' which excluds the triple clamps, hub/wheel and disk brake system as the kit above.

- 35mm Upside Down design
- 5 inches of travel
- Independent compression & rebound
- Nitrite coated lower tubes with guards
- Adjustable spring preload
- CNC works clamps with adjustable bar mount

The Minicross 32mm Conventional forks are a great upgrade from the standard forks but without the amount of control over adjustments like the Shiver 35mm.

This is still a great option if your looking at changing upgrading your standard set-up.

This option is for 'Legs Only' which excluds the triple clamps, hub/wheel and disk brake system as the kit above.

- 5 inches of travel
- SSV Speed Sensitive Dampening System
- Nitrite coated upper tubes
- CNC works clamps with adjustable bar mount

Designed especially for the Marzocchi/Formula brake master cylinder that is part of the Marzocchi front suspension and brake system upgrade. This really is the ultimate in bling, but with the added benefit of giving the formula set-up far more 'feel' and control.

C5 comes with a 5-Year guarantee!

Developed by Red Baron's factory team, featuring 6 inch of fully adjustable travel, mx or bmx mount positions and produced from 6061 aluminium with 4130 chromoly stanchions.

If your goinf to upgrade your forks, then these are the boys to go for!

If your minbikes taking a pounding then you may want to think about these fork extenders. Again produced by Red Baron and designed to withstand more abuse than the standard fork body as they are far stronger, they also
increase the fork ride height by 1inch.

Includes extended brake cable and nylon bushings.

Based on the fork extenders above with the addition of the RB disk brake system of greater stopping power and feel.

Hub converts stock drum brake into a disk system.

Developed to be used in conjunction with the Red Baron Factory Forks above, featuring billet hub with sealed bearings and hydraulic disk brake. Huge 160mm rotor included with drilled for 28 hole/10 gauge spokes.

The Marzocci hydraulic front brake kit includes everything you need to convert your existing front brake system into a upgraded disk set-up which will give you inhanced stopping power and greater control on your braking.

The kit includes, lever, hose, caliper & disc rotor.

Red Baron upgraded fork springs designed to stiffen the front end to make your minbike more suitable for the adult rider.

Designed to work with the RB shock spring for the ideal first suspension upgrade.

If your serious about your minbike and your old enough to not be at school anymore!, your going to need to upgrade your shock springs.

Designed to stiffen your ride and a must for anyone weighing over 100 lbs, mounts in minutes and available in Blue and Red.

Founded in 1974 and renowned for making top class mountain bike shox/forks Fox return to their roots with this ultra lightweigh, fully adjustable Float MXR Shock. As used by Jeremy McGrath!

Key Features:

Weights only 1.1lbs
Easy to install with no seat or frame modification
Re-buildable and re-valvable, & fully adjustable!
Air adjustable, no springs, race proven!

Well the Red Baron Works Factory Frame has always been popular but the shock has always been a bit of a weak spot, but not now!

Key Features:

Built to order with custom spring.
Fully adjustable, with 15 click settings
Works Spec shock for your Factory Frame

Regarded as the best aftermarket rear shock available..... it's got to be good BBR use it on their factory perimeter frames! In the recent Minimoto SX in Las Vagas, all 3 of the top riders in the 12inch class used Elka rear shocks.

Key Features:

More travel for a smoother ride
(from 2.8 inches to a true 4.1 inches)

40 clicks of rebound adjustment that does not afffect compression with a wide range of compression adjustment.

Handcrafted from CNC machined billet aluminium.

Are you a Xsport Mk2 owner with extended MX style swingarm and struggling to find a rear shock upgrade? We have the solution with these custom built shocks to your weight/riding style with full compression and preload adjustment.

See comments below by one of our satisfied customers....

The Marzocchi complete wheel upgrade is built and ready to use and includes, stronger rim, hub, spokes and Pirelli tyre. Available in bare metal or anodized black.

Wheels options from 10, 12 and 14 inch.

Includes heavy duty 10 or 12inch rim, and billet hub laced with heavy duty spokes, red baron rim band and disc brake kit and hardware


.

Developed by Red Baron's factory team, this hub/brake disk set-up is the result of years of development and is the most technically advanced available.

Featuring: Drilled for 28 hole/10 gauge spokes, reduced weight for faster acceleration, huge 38mm sealed ball bearings, disk mount caliper and 160mm rotor included and fits stock frames.

The Red Baron upgraded swingarm increases the wheel base by 2 inches. Burly oversized tubing is designed hold up to the riding of the most aggressive of riders.

Includes ball bearings, chain slider and longer brake pin.

Now were getting serious!
If your really hitting those jumps hard, sooner or later your going to notice your frame taking on a new shape as it bends. Even worse, you could notice it cracking and splitting in two,

This frame is 1inch longer than stock and 4 times stronger, heat-treated chromoly steel won't crack or bend and is available untreated or finnished in black or red.

The Red Baron Chromo Pro Frame is brand new for 2005. It bridges the gap between the RD upgraded chromo frame (above) and the full factroy frame (below)

This frame is 1inch longer than stock and 4 times stronger, heat-treated chromoly steel anf finnished in matt black. A RB heavy duty swingarm is also built into the frame incorporating the RB factory 210mm shock.

Developed by Red Baron's factory team, this frame is the result of years of development..

The frame is constructed of two inch oversized square tube with 5/16 wall backbone for enhanced strength which is also four pounds lighter that a stock frame!

Also features over six inches of ultra plush travel, as this set-up includes a X Fusion Pro Shock with four inches longer wheelbase and one inch longer forward of the tank.

PLEASE EMAIL FOR BEST PRICE

I'll cut to the chase, check out the spec!
RRP is £1500 but please email for special price!

6061 aluminium frame and swingarm, 3 inches longer than stock. High quality shock with adjustable rebound, compresion and pre-load. 6 inches of rear travel. Same weight as stock frame but 5 times stronger!

As used by Carhichael, McGrath, Pastrana.

PLEASE EMAIL FOR BEST PRICE

Handcrafted by master fabricators at BBR USA, this has got to be the ultimate in minibike frame upgrades!

6061 aluminium twin spar frame, 1" longer than stock with 3inch longer swingarm.

Over 6 inches of rear travel utilizing the renowned Elka rear shock.

Kit includes, frame, subframe, swingarm, shock, D-Section exhaust, petrol tank, footpeg mounts, carb manifold adaptor, chain guard and BBR billet fuel cap.

PLEASE EMAIL FOR BEST PRICE

Building your mini from scratch with no donor bike, then you'll be needing fuel tank!

Why spend £150+ for an original Honda when you can have this RB replacement for just over half the cost.

My Marzochi Shivers have just seemed to get better and better with each ride as they have bed in. I like the 12" front wheel although J4S and Mooie reckon im cheating and its shite blah blah blah.... (jealousy :).

Check out more pics of Dan's bike here

Thanks for all the help over the last few months. Most people run a mile when they here about Mk2 Xsport suspension, but you seemed to take it as a challenge, and a challenge you totally conquered. The new shock is a dream, fits perfectly and very high build quality, bling......... it's super smooth and handles all the jumps very well!

Just to let you no I got a parcel today and have just finished putting all by parts on, (alpinestars graphics, elka, pro-circuit exhaust and uni filter)

Looks and sounds great all ready for Mallory on Sunday.
Thanks for the free filter and the great service, just need to save for some new forks next but you will be hearing from me.